Asbestos - Safe Handling Safe Work Method Statement
This SWMS provides guidance on working with or removing small amounts of non-friable asbestos less than 10 m2 in area. (No licence required). This SWMS should only be used for minor work in which asbestos or asbestos-containing materials (ACM) are encountered in the workplace or where works are being performed. Examples may be drilling into, painting or replacing a small section of non-friable asbestos sheeting wall or removing non-friable asbestos lagging for a pipe repair. Please note that this SWMS does not cover the removal of friable asbestos, or non-friable asbestos greater than 10sqm, or working with asbestos friction materials such as brake pads.
Ready to Use
Ensure that you save time with our pre-filled, fully customisable templates. All you need to do is add your company details, ABN, and include any site specific details or risks ensuring it is specific to the task being performed. It is then ready for printing and inclusion in your overall WHS System.
Asbestos - Safe Handling SWMS Content:
High Risk Construction Work
Risk Assessment Matrix
Hierarchy of Controls
Job Steps (includes potential hazards and control measures)
Planning & Preparation
Training and Capabilities
Assess onsite conditions
Prepare the work area
Removing small sections (<10sqm) of ACM, i.e. asbestos wall cladding, roofing materials etc.
Paint / repaint ACM
Disposing of asbestos waste
Emergency Response Procedures
Employee sign off section
Review & Monitoring
This document has been developed and provided by SafetyCulture Pty Ltd and is offered for sale by ACRIS Services who are licensed resellers for Australia. SafetyCulture employ former WorkSafe Inspectors to research and write documents ensuring safe work practices can be understood and followed by employees performing high risk activities in the course of their duties. SafetyCulture's mission is to make Safety A Way Of Life for workers across the world by providing documentation through software and printable files.
SWMS - Safe Work Method Statement
Safe Work Method Statements (SWMS) are required for any high risk activity that is performed by an employee in the workplace. Each document must identify the risks involved when performing the activity, a risk rating for each risk, a safe work method to perform the activity and a residual risk rating for the risks. SafetyCulture SWMS comply with current WH&S legislation in all states across Australia. This document is fully completed with a step by step procedure that can be edited and appended. This is not a blank template, it is a comprehensive procedure that has been researched and developed by a qualified writer.